Product Description
Fender Hot Rod DeVille 410 III Guitar Combo Amp
Tone-Shaping Tools to Extend Your Sonic Range
The Fender Hot Rod DeVille 410 III has 2 x 1/4-inch jacks in the input section, with Normal and Bright switches right next door. Controls on the top panel include Presence, Reverb, Middle, Bass, Treble, as well as independent Master Volume and Drive Volume knobs. A Channel Select Switch is located right smack in the top middle of the panel, so you can get to it easily when necessary.
I/O for the Studio, Too
The Hot Rod DeVille 410’s front panel also includes a Direct Power Amp input for exploring other instrument + amplifier combinations, as well as a Preamp Output for convenient use in the recording studio! There is a full FX Loop accessible via the rear.
Loaded with Eminence Speakers
Inside the Hot Rod DeVille 410 III you’ll find 4 x 10-inch Special Design Eminence 30-watt Speakers with a nominal 8 ohm impedance. These were adapted to the DeVille series to provide make your tone more punchy and articulate, with better response. Overall, the harmonic reproduction on this amp is richer than on most. This is especially pronounced when you’re running the amp in Drive mode, and exploiting the excellent crunch that generates naturally from the tubes.
Almost All-Tube — With Super-Quiet Solid-State Rectifier
The tube circuits themselves include 3 x 12AX7 tubes in the preamp section, and 2 x 6L6 power tubes in the output section. The rectifier section, however, is all solid-state, ensuring an output with lots of character but no extraneous noise or distortion.
Features:
– Three Selectable Channels (Normal, Drive and More Drive)
– 3 x 12AX7 Pre Amp Tubes
– 2 x 6L6 Power Tubes
– Solid State Rectifier
– 4 x 10-inch Special Design Eminence 30-watt Speakers
– Presence, Reverb, Master Volume, Middle, Bass, Treble, Drive Select Switch, Drive Volume, and Bright Switch Controls
– Spring Reverb
– FX Loop
– Extension Speaker Jack
– “Dog Bone” Handle
– Black Textured Vinyl Covering with Black/Silver Grille Cloth
– Vintage Pointer Knobs
– Internal Variable Bias Control
– Amplifier Cover Included
Specs:
Model Name: Hot Rod DeVille 410 III
– Series: Hot Rod
– Amplifier Type: Tube
– Color / MSRP* / Part # : Black / 223-0100-000
– Voltage: 120V
– Wattage: 60 Watts
– Effects Loop: Effects Loop (Preamp Out, Power Amp In)
– Inputs: Two
– Extension Speaker Jack: Extension Speaker Jack
– Channels: Three Selectable Channels (Normal, Drive and More Drive)
– Rectifier: Solid State Rectifier
– Controls: Presence, Reverb, Master Volume, Middle, Bass, Treble, Drive Select Switch, Drive Volume, Bright Switch
– Hardware Finish: Chrome
– Pilot Light Jewel: Red Amp Jewel
– Handle: “Dog Bone” Handle
– Front Panel: Black Front Panel
– Grill Cover Cloth: Black Textured Vinyl Covering with Blackface Style Black/Silver Grille Cloth
– Input Impedance: 1M (Input 1)/136K (Input 2)
– Output Impedance: 4 or 8 ohms
– Amplifier Length: 10.75″ (27.3 cm)
– Amplifier Width: 23.5″ (59.7 cm)
– Amplifier Height: 23.5″ (59.7 cm)
– Amplifier Weight: 50 lbs (22.7 kg)
– Effects: Spring Reverb
– Speaker: 4-10″ Special Design Eminence(R) 8 ohm, 30 watt Speakers
– Pre Amp Tubes: 3 x 12AX7
– Power Tubes: 2 x 6L6
– Unique Features: Independent Gain and Master Controls in Drive Channel, Bright Switch, Effects Loop, Reverb, External Speaker Jack, 2-Button 3-Function Footswitch for Channel Select, Drive Select and “More Drive” Select, Black panel, Vintage Pointer Knobs, Internal Variable Bias Control
– FootSwitch: 2-Button, 3-Function Footswitch Included
– Knobs: Chicken head-style amp knobs
– Accessories: Includes Amplifier Cover and 2-Button Footswitch
– Cover: Amplifier Cover Included
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 70 lbs
- Shipping Dimensions: 26 x 26 x 13 in
Reviews
There are no reviews yet